Parts

USED RH 70 GAL CENTER FILL TANK ASSEMBLY/HAS BEEN PATCHED/REPAIRED SEE PICS 23" DIAMETER

LH SIDE 100 GAL FUEL TANK. HAS DENT IN THE SIDE WHERE TANK BULGES. SEE PICTURE

GOOD USED LH 100 GAL TANK ASSEMBLY/ HAS FUEL HEATER MANIFOLD/TANK HEATER CUTOUT

CUSTOM 200 GAL TANK/ 2 FILL NECKS. ALLEN JAC MFG. LEFT OR RIGHT SIDE

GOOD USED PASSENGER SIDE 150 GAL REAR FILL FUEL TANK. CAN BE USED AS DRIVERS SIDE FRONT FILL. FITS W900 T800 T600. 07 AND OLDER STYLE MANIFOLD.

RH SIDE 120 GAL FUEL TANK. HAS A MINOR DENT. 28'' DIAMETER. INCLUDES STRAPS AND BRACKETS

USED 135 GAL TANK ASSEMBLY, HAS BEEN PATCHED UP HIGH ON REAR, DOESNT LOOK LIKE IT WAS LEAKING.SEE PICTURES

RH SIDE GOOD USED 120 GAL CUSTOM FREIGHTLINER TANKS. SEE PICTURES HAS MINOR DENT ON BOTTOM END

LH SIDE TANK IN DECENT CONDITION HAS DENT ON INSIDE BY THE SADDLE. 100 GALLON 48X25

RH SIDE TANK IN DECENT SHAPE HAS DENT ON THE INSIDE BY THE SADDLE. 100 GALLON 48X25

LH SIDE GOOD USED 120 GAL CUSTOM FREIGHTLINER TANKS. SEE PICTURES HAS MINOR SCUFFS

LH 110 GAL TANK, SMALL DENT IN TOP REAR. NEEDS INSPECTED

USED RH 90 GAL FUEL TANK ASSEMBLY. HAS BEEN PATCHED. LOOKS OK. VISUALLY INSPECT

LH SIDE FUEL TANK HAS MINOR DENT TO FRONT END UNDER THE RED COVER. SEE PICTURE

GOOD USED 100 GAL TANK/ NO FUEL MANIFOLD/// RH OR LH SIDE. SINGLE TOP PORT.

* High Quality Aluminum Replacement Tank * With Early Style Manifold For 2006 And Older Peterbilts * Gallons U.S. - 150 * Diameter - 26 Inches * Length Seam To Seam - 67 Inches * Length Over All - 72 Inches * Filler Neck - Rear Fill - 4.50 Inches From Rear Weld Seam - 19.00 Inches Above Horizontal Weld Seam - Back Of Tank * Original Style Manifold With Sending Unit Hole And Ports - 33.50 Inches From Rear Weld Seam - 13.00 Inches Above Horizontal Weld Seam - Back Of Tank * Drains Or Cross Overs - 33.50 Inches From Rear Weld Seam - 27.82 Inches Below Horizontal Weld Seam - Back Of Tank * Caps And Fittings Sold Separately, Not Included With Tank * Sold Individually * Made In North America * Warranty On Fuel Tanks Against Defects In Workmanship & Material From Date Of Purchase

* High Quality Aluminum Replacement Tank * With Late Style Manifold For 2008 And Newer Peterbilts * Gallons U.S. - 150 * Diameter - 26 Inches * Length Seam To Seam - 67 Inches * Length Over All - 72 Inches * Filler Neck - Rear Fill - 4.50 Inches From Rear Weld Seam - 19.00 Inches Above Horizontal Weld Seam - Back Of Tank * New Style Manifold With Sending Unit Hole - 33.50 Inches From Rear Weld Seam - 13.00 Inches Above Horizontal Weld Seam - Back Of Tank * Pickup And Return Ports - Tubes Built In To Tank - 33.50 Inches From Rear Weld Seam - 9.625 Inches Above Horizontal Weld Seam - Back Of Tank * Drains Or Cross Overs - 33.50 Inches From Rear Weld Seam - 27.82 Inches Below Horizontal Weld Seam - Back Of Tank * Caps And Fittings Sold Separately, Not Included With Tank * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase ** Please Verify Manifold Style, Dimensions, Filler And Fittings For Sizes And Locations Before Purchasing Fuel Tanks, There May Be More Than One Option For Your Year, Make And Model **

* High Quality Replacement Tank * Made Of Aluminum * Passenger Side * 26 Inch Height * 72 Inch Length * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase *** High Quality Aftermarket Replacement Part (Not OEM) *** ** Please Verify Manifold Style, Dimensions, Filler And Fittings For Sizes And Locations Before Purchasing Fuel Tanks, There May Be More Than One Option For Your Year, Make And Model ** * Replaces OE Numbers 11-03664P, 11-02939, 11-03664

* High Quality Aluminum Replacement Tank * With Early Style Manifold For 2006 And Older Peterbilt * Gallons U.S. - 135 * Diameter - 26 Inches * Length Seam To Seam - 60 Inches * Length Over All - 65 Inches * Filler Neck - Rear Fill - 4.50 Inches From Rear Weld Seam - 19.00 Inches Above Horizontal Weld Seam - Back Of Tank * Original Style Manifold With Sending Unit Hole And Ports - 30.00 Inches From Rear Weld Seam - 13.00 Inches Above Horizontal Weld Seam - Back Of Tank * Drains Or Cross Overs - 30.00 Inches From Rear Weld Seam - 27.82 Inches Below Horizontal Weld Seam - Back Of Tank * Caps And Fittings Sold Separately, Not Included With Tank * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase

NEW AFTERMARKET DRIVER SIDE FUEL TANK. 150 GALLON. CAN BE USED AS FRONT FILL PASSENGER SIDE ALSO. 74" TOTAL LENGTH 72" WELD TO WELD. * High Quality Aluminum Replacement Tank * For 2007 And Older Kenworths * Gallons U.S. - 150 * Diameter - 24.5 Inches * Length Seam To Seam - 72 Inches * Length Over All - 74 Inches * Filler Neck - Rear Fill - 4.00 Inches From Rear Weld Seam - 38.62 Inches Above Horizontal Weld Seam - Back Of Tank * Manifold With Sending Unit Hole - 49.00 Inches From Front Weld Seam - 30.62 Inches Above Horizontal Weld Seam - Back Of Tank * Drains Or Cross Overs - 49.00 Inches From Front Weld Seam - 3.75 Inches Below Horizontal Weld Seam - Back Of Tank * Caps And Fittings Sold Separately, Not Included With Tank * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase

NEW AFTERMARKET PASSANGER SIDE REAR FILL. CAN BE USED FOR DRIVER SIDE FRONT FILL. * High Quality Aluminum Replacement Tank * For 2007 And Older Kenworths * Gallons U.S. - 150 * Diameter - 24.5 Inches * Length Seam To Seam - 72 Inches * Length Over All - 74 Inches * Filler Neck - Rear Fill - 4.00 Inches From Rear Weld Seam - 38.62 Inches Above Horizontal Weld Seam - Back Of Tank * Manifold With Sending Unit Hole - 49.00 Inches From Front Weld Seam - 30.62 Inches Above Horizontal Weld Seam - Back Of Tank * Drains Or Cross Overs - 49.00 Inches From Front Weld Seam - 3.75 Inches Below Horizontal Weld Seam - Back Of Tank * Caps And Fittings Sold Separately, Not Included With Tank * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase

Driver side rear fill. (can be swapped to passenger / make front fill) Fits 07 and older models. * High Quality Fuel Tank * Made Of Aluminum * 24.5 Inches X 48 Inches * Driver Side * Center Manifold For Fittings * Sold Individually * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase ** Please Verify Manifold Style, Dimensions, Filler And Fittings For Sizes And Locations Before Purchasing Fuel Tanks, There May Be More Than One Option For Your Year, Make And Model ** *** High Quality Aftermarket Replacement Part (Not OEM)***

* High Quality Aluminum Replacement Tank * Driver Side * 24.5 Inches x 36 Inches * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase * Fits Kenworth K100C 1985 thru 1992 * Fits Kenworth K100 Cabover 1967 thru 1984 * Fits Kenworth K100E 1985 thru 1992 * Fits Kenworth T300 1994 thru 2007 * Fits Kenworth T800 1986 thru 2007 * Fits Kenworth T800 Curved Glass 1993 thru 2007 * Fits Kenworth W-900B 1983 thru 2007 * Fits Kenworth W-900L 1990 thru 2007 * Fits Kenworth W-900B AeroCab 1994 thru 2007 * Fits Kenworth W-900L AeroCab 1994 thru 2007

NEW AFTERMARKET 23" X 62" FUEL TANK * High Quality Aluminum Replacement Tank * With Early Style Manifold For 2006 And Older Peterbilts * Gallons U.S. - 110 * Diameter - 23 Inches * Length Seam To Seam - 57 Inches * Length Over All - 62 Inches * Filler Neck - Rear Fill - 4.50 Inches From Rear Weld Seam - 16.50 Inches Above Horizontal Weld Seam - Back Of Tank * Original Style Manifold With Sending Unit Hole And Ports - 28.50 Inches From Rear Weld Seam - 11.50 Inches Above Horizontal Weld Seam - Back Of Tank * Drains Or Cross Overs - 28.50 Inches From Rear Weld Seam - 24.50 Inches Below Horizontal Weld Seam - Back Of Tank * Caps And Fittings Sold Separately, Not Included With Tank * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase ** Please Verify Manifold Style, Dimensions, Filler And Fittings For Sizes And Locations Before Purchasing Fuel Tanks, There May Be More Than One Option For Your Year, Make And Model ** ***High Quality Aftermarket Replacement Part (Not OEM)***

REAR OR FRONT FILL DEPENDING ON SIDE INSTALLED. * High Quality Aluminum Replacement Tank * For 2007 And Older Kenworths * Gallons U.S. - 120 * Diameter - 24.5 Inches * Length Seam To Seam - 58 Inches * Length Over All - 60 Inches * Filler Neck - Front Fill - 4.00 Inches From Front Weld Seam - 38.62 Inches Above Horizontal Weld Seam - Back Of Tank * Manifold With Sending Unit Hole - 29.00 Inches From Front Weld Seam - 30.62 Inches Above Horizontal Weld Seam - Back Of Tank * Drains Or Cross Overs - 29.00 Inches From Rear Weld Seam - 3.75 Inches Below Horizontal Weld Seam - Back Of Tank * Caps And Fittings Sold Separately, Not Included With Tank * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase