Parts

USED RH 100 GAL FUEL TANK OFF 1996 MACK CH613, DENTS BY HANGERS

GOOD USED 50 GAL DIESEL STEP TANK. LOOKS OK/ MINOR INDENTS ON BOTTOM WHERE SITS ON BRACKETS. SEE PICS

USED RH 70 GAL CENTER FILL TANK ASSEMBLY/HAS BEEN PATCHED/REPAIRED SEE PICS 23" DIAMETER /////LESS SADDLES AND STRAPS/////

KENWORTH 36" FUEL TANK STEP FITS MULTIPLE APPLICATIONS. T600 T800 W900 T300. MOUNTS ON FUEL TANK STRAP.

USED LH 150 GAL FUEL TANK, AFTERMARKET TRP WITH SCREW ON FUEL CAP, OFF 2006 PETE 379

GOOD USED LH 100 GAL TANK ASSEMBLY/ HAS FUEL HEATER MANIFOLD/TANK HEATER CUTOUT

USED LH 110 GAL FUEL TANK OFF 2016 KENWORTH T680

GOOD USED D STYLE DIESEL TANK

GOOD USED FRONT FILL TANK ASSEMBLY, COUPLE SMALL DENTS. LOOKS PRETTY GOOD OVERALL

USED RH 150 GAL FUEL TANK OFF 2008 INTERNATIONAL PROSTAR

GOOD USED TANK, LOOKS GOOD, HAS BEEN PATCHED VERY WELL UNDER STRAPS

GOOD USED PASSENGER SIDE 150 GAL REAR FILL FUEL TANK. CAN BE USED AS DRIVERS SIDE FRONT FILL. FITS W900 T800 T600. 07 AND OLDER STYLE MANIFOLD.

RH SIDE 120 GAL FUEL TANK. HAS A MINOR DENT. 28'' DIAMETER. No straps or brackets

USED 135 GAL TANK ASSEMBLY, HAS BEEN PATCHED UP HIGH ON REAR, DOESNT LOOK LIKE IT WAS LEAKING.SEE PICTURES

* High Quality Aluminum Replacement Tank * With Early Style Manifold For 2006 And Older Peterbilt * Gallons U.S. - 135 * Diameter - 26 Inches * Length Seam To Seam - 60 Inches * Length Over All - 65 Inches * Filler Neck - Rear Fill - 4.50 Inches From Rear Weld Seam - 19.00 Inches Above Horizontal Weld Seam - Back Of Tank * Original Style Manifold With Sending Unit Hole And Ports - 30.00 Inches From Rear Weld Seam - 13.00 Inches Above Horizontal Weld Seam - Back Of Tank * Drains Or Cross Overs - 30.00 Inches From Rear Weld Seam - 27.82 Inches Below Horizontal Weld Seam - Back Of Tank * Caps And Fittings Sold Separately, Not Included With Tank * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase

* High Quality Aluminum Replacement Tank * For 2008 And Newer Kenworths * Gallons U.S. - 150 * Diameter - 24.5 Inches * Length Seam To Seam - 72 Inches * Length Over All - 74 Inches * Filler Neck - Rear Fill - 4.00 Inches From Rear Weld Seam - 38.62 Inches Above Horizontal Weld Seam - Back Of Tank * Manifold With Sending Unit Hole - 49.50 Inches From Front Weld Seam - 30.62 Inches Above Horizontal Weld Seam - Back Of Tank * Drains Or Cross Overs - 49.50 Inches From Front Weld Seam - 3.75 Inches Below Horizontal Weld Seam - Back Of Tank * Caps And Fittings Sold Separately, Not Included With Tank * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase

* High Quality Aluminum Replacement Tank * With Late Style Manifold For 2008 And Newer Peterbilts * Gallons U.S. - 150 * Diameter - 26 Inches * Length Seam To Seam - 67 Inches * Length Over All - 72 Inches * Filler Neck - Rear Fill - 4.50 Inches From Rear Weld Seam - 19.00 Inches Above Horizontal Weld Seam - Back Of Tank * New Style Manifold With Sending Unit Hole - 33.50 Inches From Rear Weld Seam - 13.00 Inches Above Horizontal Weld Seam - Back Of Tank * Pickup And Return Ports - Tubes Built In To Tank - 33.50 Inches From Rear Weld Seam - 9.625 Inches Above Horizontal Weld Seam - Back Of Tank * Drains Or Cross Overs - 33.50 Inches From Rear Weld Seam - 27.82 Inches Below Horizontal Weld Seam - Back Of Tank * Caps And Fittings Sold Separately, Not Included With Tank * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase ** Please Verify Manifold Style, Dimensions, Filler And Fittings For Sizes And Locations Before Purchasing Fuel Tanks, There May Be More Than One Option For Your Year, Make And Model ** ***High Quality Aftermarket Replacement Part (Not OEM)***

* High Quality Aluminum Replacement Tank * With Late Style Manifold For 2008 And Newer Peterbilts * Gallons U.S. - 150 * Diameter - 26 Inches * Length Seam To Seam - 67 Inches * Length Over All - 72 Inches * Filler Neck - Rear Fill - 4.50 Inches From Rear Weld Seam - 19.00 Inches Above Horizontal Weld Seam - Back Of Tank * New Style Manifold With Sending Unit Hole - 33.50 Inches From Rear Weld Seam - 13.00 Inches Above Horizontal Weld Seam - Back Of Tank * Pickup And Return Ports - Tubes Built In To Tank - 33.50 Inches From Rear Weld Seam - 9.625 Inches Above Horizontal Weld Seam - Back Of Tank * Drains Or Cross Overs - 33.50 Inches From Rear Weld Seam - 27.82 Inches Below Horizontal Weld Seam - Back Of Tank * Caps And Fittings Sold Separately, Not Included With Tank * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase ** Please Verify Manifold Style, Dimensions, Filler And Fittings For Sizes And Locations Before Purchasing Fuel Tanks, There May Be More Than One Option For Your Year, Make And Model **

NEW AFTERMARKET DRIVER SIDE FUEL TANK. 150 GALLON. CAN BE USED AS FRONT FILL PASSENGER SIDE ALSO. 74" TOTAL LENGTH 72" WELD TO WELD. * High Quality Aluminum Replacement Tank * For 2007 And Older Kenworths * Gallons U.S. - 150 * Diameter - 24.5 Inches * Length Seam To Seam - 72 Inches * Length Over All - 74 Inches * Filler Neck - Rear Fill - 4.00 Inches From Rear Weld Seam - 38.62 Inches Above Horizontal Weld Seam - Back Of Tank * Manifold With Sending Unit Hole - 49.00 Inches From Front Weld Seam - 30.62 Inches Above Horizontal Weld Seam - Back Of Tank * Drains Or Cross Overs - 49.00 Inches From Front Weld Seam - 3.75 Inches Below Horizontal Weld Seam - Back Of Tank * Caps And Fittings Sold Separately, Not Included With Tank * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase

* High Quality Aluminum Replacement Tank * With Early Style Manifold For 2006 And Older Peterbilt * Gallons U.S. - 135 * Diameter - 26 Inches * Length Seam To Seam - 60 Inches * Length Over All - 65 Inches * Filler Neck - Rear Fill - 4.50 Inches From Rear Weld Seam - 19.00 Inches Above Horizontal Weld Seam - Back Of Tank * Original Style Manifold With Sending Unit Hole And Ports - 30.00 Inches From Rear Weld Seam - 13.00 Inches Above Horizontal Weld Seam - Back Of Tank * Drains Or Cross Overs - 30.00 Inches From Rear Weld Seam - 27.82 Inches Below Horizontal Weld Seam - Back Of Tank * Caps And Fittings Sold Separately, Not Included With Tank * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase

100 GALLON CENTER FILL PETERBILT TANK. * High Quality Fuel Tank * Diameter - 26 Inches * Length Seam To Seam - 43 Inches * Length Over All - 48 Inches * Gallons U.S. - 100 * With Early Style Manifold * Filler Neck - Center Fill - 24.00 Inches From Rear Weld Seam - 19.00 Inches Above Horizontal Weld Seam * Original Style Manifold With Sending Unit Hole - 24.00 Inches From Rear Weld Seam - 13.00 Inches Above Horizontal Weld Seam * Pickup And Return Ports - Tubes Built In To Tank - 21.50 Inches From Front Weld Seam - 22.50 Inches Below Horizontal Weld Seam * Drains Or Cross Overs - 21.50 Inches From Front Weld Seam - 13.00 Inches Below Horizontal Weld Seam * Caps And Fittings Sold Separately * Sold Individually * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase

RH SIDE GOOD USED 120 GAL CUSTOM FREIGHTLINER TANKS. SEE PICTURES HAS MINOR DENT ON BOTTOM END

GOOD USED TANK ASSEMBLY/ WITH STEPS/ LOOKS LIKE OFF FREIGHTLINER

LH SIDE TANK IN DECENT CONDITION HAS DENT ON INSIDE BY THE SADDLE. 100 GALLON 48X25

RH SIDE TANK IN DECENT SHAPE HAS DENT ON THE INSIDE BY THE SADDLE. 100 GALLON 48X25