Parts

GOOD USED 100 GAL TANK/ NO FUEL MANIFOLD/// RH OR LH SIDE. SINGLE TOP PORT.

100 GALLON CENTER FILL PETERBILT TANK. * High Quality Fuel Tank * Diameter - 26 Inches * Length Seam To Seam - 43 Inches * Length Over All - 48 Inches * Gallons U.S. - 100 * With Early Style Manifold * Filler Neck - Center Fill - 24.00 Inches From Rear Weld Seam - 19.00 Inches Above Horizontal Weld Seam * Original Style Manifold With Sending Unit Hole - 24.00 Inches From Rear Weld Seam - 13.00 Inches Above Horizontal Weld Seam * Pickup And Return Ports - Tubes Built In To Tank - 21.50 Inches From Front Weld Seam - 22.50 Inches Below Horizontal Weld Seam * Drains Or Cross Overs - 21.50 Inches From Front Weld Seam - 13.00 Inches Below Horizontal Weld Seam * Caps And Fittings Sold Separately * Sold Individually * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase

* High Quality Aluminum Replacement Tank * With Early Style Manifold For 2006 And Older Peterbilts * Gallons U.S. - 100 * Diameter - 26 Inches * Length Seam To Seam - 43 Inches * Length Over All - 48 Inches * Filler Neck - Rear Fill - 4.50 Inches From Rear Weld Seam - 19.00 Inches Below Horizontal Weld Seam - Back Of Tank * Original Style Manifold With Sending Unit Hole And Ports - 21.50 Inches From Rear Weld Seam - 13.00 Inches Below Horizontal Weld Seam - Back Of Tank * Drains Or Cross Overs - 21.50 Inches From Rear Weld Seam - 27.82 Inches Below Horizontal Weld Seam - Back Of Tank * Caps And Fittings Sold Separately, Not Included With Tank * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase

NEW AFTERMARKET PETERBILT FUEL TANK. DRIVERS SIDE REAR FILL OR PASSANGER SIDE FRONT FILL. * High Quality Aluminum Replacement Tank * With Early Style Manifold For 2006 And Older Peterbilts * Gallons U.S. - 100 * Diameter - 26 Inches * Length Seam To Seam - 43 Inches * Length Over All - 48 Inches * Filler Neck - Rear Fill - 4.50 Inches From Rear Weld Seam - 19.00 Inches Below Horizontal Weld Seam - Back Of Tank * Original Style Manifold With Sending Unit Hole And Ports - 21.50 Inches From Rear Weld Seam - 13.00 Inches Below Horizontal Weld Seam - Back Of Tank * Drains Or Cross Overs - 21.50 Inches From Rear Weld Seam - 27.82 Inches Below Horizontal Weld Seam - Back Of Tank * Caps And Fittings Sold Separately, Not Included With Tank * Sold Individually * Made In North America * Warranty On Fuel Tank Against Defects In Workmanship & Material From Date Of Purchase